7 research outputs found
Recommended from our members
Distribution Network Operation with High Penetration of Renewable Energy Sources. Joint Active/Reactive Power Procurement: A Market-Based Approach for Operation of Distribution Network
Distributed generators (DGs) are proposed as a possible solution to supply
economic and reliable electricity to customers. It is adapted to overcome the
challenges that are characterized by centralized generation such as
transmission and distribution losses, high cost of fossil fuels and environmental
damage. This work presents the basic principles of integrating renewable DGs
in low voltage distribution networks and particularly focuses on the operation
of DG installations and their impacts on active and reactive power.
In this thesis, a novel technique that applies the stochastic approach for the
operation of distribution networks with considering active network
management (ANM) schemes and demand response (DR) within a joint active
and reactive distribution market environment is proposed. The projected model
is maximized based on social welfare (SW) using market-based joint active
and reactive optimal power flow (OPF). The intermittent behaviour of
renewable sources (such as solar irradiance and wind speed) and the load
demands are modelled through Scenario-Tree technique. The distributed
network frame is recast using mixed-integer linear programming (MILP) that is
solved by using the GAMS software and then the obtained results are being
analysed and discussed. In addition, the impact of wind and solar power
penetration on the active and reactive distribution locational prices (D-LMPs)
within the distribution market environment is explored in terms of the
maximization of SW considering the uncertainty related to solar irradiance,
wind speed and load demands. Finally, a realistic case study (16-bus UK
generic medium voltage distribution system) is used to demonstrate the
effectiveness of the proposed method. Results show that ANM schemes and
DR integration lead to an increase in the social welfare and total dispatched
active and reactive power and consequently decrease in active and reactive
D-LMPs.Ministry of Higher Education and Scientific Research - IraqThe selected author's publications, the published versions of which were attached at the end of the thesis, have been removed due to copyright
Recommended from our members
Active distribution network operation: A market-based approach
YesThis article proposes a novel technique for operation of distribution networks with considering active network management (ANM) schemes and demand response (DR) within a joint active and reactive distribution market environment. The objective of the proposed model is to maximize social welfare using market-based joint active and reactive optimal power flow. First, the intermittent behavior of renewable sources (solar irradiance, wind speed) and load demands is modeled through scenario-tree technique. Then, a network frame is recast using mixed-integer linear programming, which is solvable using efficient off-the-shelf branch-and cut solvers. Additionaly, this article explores the impact of wind and solar power penetration on the active and reactive distribution locational prices within the distribution market environment with integration of ANM schemes and DR. A realistic case study (16-bus UK generic medium voltage distribution system) is used to demonstrate the effectiveness of the proposed method.This work was supported in part by the Ministry of Higher Education Scientific Research in Iraq and in part by British Academy under Grant GCRFNGR3\1541
Recommended from our members
Optimal operation of distribution networks with high penetration of wind and solar power within a joint active and reactive distribution market environment
YesIn this paper, a stochastic approach for the operation of active distribution networks within a joint active and
reactive distribution market environment is proposed. The method maximizes the social welfare using market based
active and reactive optimal power flow (OPF) subject to network constraints with integration of demand response (DR).
Scenario-Tree technique is employed to model the uncertainties associated with solar irradiance, wind speed and load
demands.
It further investigates the impact of solar and wind power penetration on the active and reactive distribution locational
prices (D-LMPs) within the distribution market environment. A mixed-integer linear programming (MILP) is used to
recast the proposed model, which is solvable using efficient off-the shelf branch-and cut solvers. The 16-bus UK generic
distribution system is demonstrated in this work to evaluate the effectiveness of the proposed method.
Results show that DR integration leads to increase in the social welfare and total dispatched active and reactive power
and consequently decrease in active and reactive D-LMPs.Ministry of Higher Education and Scientific Research of Ira
Recommended from our members
Operation and planning of distribution networks with integration of renewable distributed generators considering uncertainties: a review
YesDistributed generators (DGs) are a reliable solution to supply economic and reliable electricity to customers. It is the last stage in delivery of electric power which can be defined as an electric power source connected directly to the distribution network or on the customer site. It is necessary to allocate DGs optimally (size, placement and the type) to obtain commercial, technical, environmental and regulatory advantages of power systems. In this context, a comprehensive literature review of uncertainty modeling methods used for modeling uncertain parameters related to renewable DGs as well as methodologies used for the planning and operation of DGs integration into distribution network.This work was supported in part by the SITARA project funded by the British Council and the Department for Business, Innovation and Skills, UK and in part by the University of Bradford, UK under the CCIP grant 66052/000000
Recommended from our members
Stochastic approach for active and reactive power management in distribution networks
YesIn this paper, a stochastic method is proposed to assess the amount of active and reactive power that can be injected/absorbed to/from grid within a distribution market environment. Also, the impact of wind power penetration on the reactive and active distribution-locational marginal prices is investigated. Market-based active and reactive optimal power flow is used to maximize the social welfare considering uncertainties related to wind speed and load demand. The uncertainties are modeled by Scenario-based approach. The proposed model is examined with 16-bus UK generic distribution system.Supported by the Higher Education Ministry of Iraqi government
Distribution Network Reconfiguration Considering Security-Constraint and Multi-DG Configurations
YesThis paper proposes a novel method for distribution network reconfiguration considering security-constraints and multi-configuration of renewable distributed generators (DG). The objective of the proposed method is to minimize the total operational cost using security constrained optimal power flow (SCOPF). The impact of multi-configuration of renewable DGs in a meshed network is investigated. In this work, lines were added to the radial distribution network to analyse the network power flow in different network configurations. The added lines were connected to the closest generator bus which offered least operating cost. A 16-bus UK generic distribution system (UKGDS) was used to model the efficiency of the proposed method. The obtained results in multi-DG configuration ensure the security of the network in N-1 contingency criteria
Recommended from our members
Planning of HMG with high penetration of renewable energy sources
YesHybrid AC-DC microgrid (HMG) allows direct integration of both AC distributed generators (DGs) and DC DGs, AC and DC loads into the grid. The AC and DC sources, loads are separate out and are connected to respective subgrid mainly to reduce the power conversion, thus the overall efficiency of the system increases. This paper aims to introduce a novel hybrid AC-DC microgrid planning and design model within a microgrid market environment to maximize net social welfare (NSW). NSW is defined as present value of total demand payment minus present value of total planning cost including investment cost of distributed energy sources (DERs) and converters, operation cost of DERs and the cost of energy exchange with the utility grid subject to network constraints. Scenario Tree approach is used to model the uncertainties related to load demand, wind speed and solar irradiation. The effectiveness of the proposed model is validated through the simulation studies on a 28-bus real hybrid AC-DC microgrid